prODUCTS & SOLUTIONS

Testimonial

Foundry Power Utilizer

Foundry Power Utilizer is a highly accurate device to control furnace power using intelligent digital controller. FPU ensures optimum utilization and prevention of overshooting of the foundry’s sanctioned KVA. Foundries have been able to increase the metal output by installing FPU because of optimum KVA utilization. Just a few hours are required to install an FPU, […]

Categories:

Melt-Evaluator

Continuous monitoring and optimization of furnace energy consumption. Large digital display for energy readings Optimum utilization of foundry’s installed power Improvement in melt shop productivity. Programmable auto sintering facility for presetting the percent power and corresponding power duration for better sintering quality and improved lining life

Categories:

FT-100

This system is provided with desk mounted 9 inch HMI for remote access by the operator. Key features include: Continuous monitoring of power supply unit interlocks, alarm history/trending. Auto sintering Monitoring temperature in key water paths and hydraulic unit through communicable temperature indicators. Monitoring of coil/WCL water pressure and hydraulic oil pressure Remote access through […]

Categories:

ET- Autopour UH

Vision Controlled Unheated Automatic Pouring System Suitable for grey and ductile iron pouring. Available in capacities from 1 Ton to 3 Ton. Key benefits include increased production, increased casting yield, reduced pouring related rejections, drastic reduction metal spillage and lower labor cost. Strong construction, rigidly built for longer life. Robust hydraulic system (with standby pump), […]

Categories:

ET- Rollover Furnace

Electrotherm’ s rollover furnace is ideal For close control of pouring to produce High quality investment castings. In Rollover furnaces, metal flows directly From the furnace into the mould with Minimum air and refractory contact,Limiting both oxidation and refractory Inclusions. Also the centrifugally assistedMetal flow obtained during rolloverEnsures that moulds are filled quickly and Completely.

Categories:

ET- Pushout Furnace

The Pushout Furnace is a highly efficient crucible melting System. After completing melting in a crucible, the crucible is Pushed out hydraulically / mechanically and taken out for Pouring . this avoids heat loss and oxidation during liquid Metal transfer from crucible to ladle. The coils are lined from Inside with refractory cement to guard […]

Categories:

Back-Tilting

Electrotherm is offering Back-tilting arrangement to remove the slag in reverse position. It is normally used in foundries.

Categories:

Double Acting Fume Hood

The fume extraction hood build from boiler quality thick steel sheet is refractory linedfrom inside and integrated with refractory lined lid. Double acting fume hood can open from both front and back end of the furnace to facilitate pushing out of the lining and furnace charging respectively.

Categories:

Swivel Type Furnace Lid

Manually / hydraulically operated swivel type furnace lid is useful for reducing radiation loss and save energy during melting and holding process.  

Categories:

Lining Pushout

We own a modernized and well-coordinated manufacturing unit that has enabled us to provide the clients with Lining Push Out. This offered machine is appreciated by our patrons for smooth and quick removal of refractory lining. To rule out possibility of any defects, we thoroughly check this product on various parameters such as material strength […]

Categories: